Dalhart, Spearman, Dumas, Perryton, Pampa, Guymon, Boise City

John Deere D170

Double tap to zoom

 

Features

End-of-pin lubrication means easy maintenance

All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting is not a problem as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting.

Parking stand kit

  • Parking stands
  • Handled pins
  • Hydraulic hoses
  • Quick-couplers
  • Mounting bracket and hardware

Mounting frame for 4M 

The D170 is designed primarily for the 4M Tractor. It is a rigid mounted loader meaning it is not intended for Quik-Park™ functionality. The loader mounting frame consists of masts secured firmly to the tractor, supported by the brace and hood guard.

With the 4R hydraulic connection kit, the D170 Non Self-Leveling (NSL) Loader can be installed on a 4R Open Operator Station (OOS) Tractors as well. 

Quick-Change attachment carrier

Allows fast, easy removal and mounting of attachments without tools. 

Hydraulic hose and fittings 

The compact loaders use the same two-wire braid, high-pressure hydraulic hose found on larger loaders. This provides added reliability and longer life. 

The fittings used to connect the hoses to the hydraulic cylinders and hydraulic lines utilize O-ring face seal fittings to virtually eliminate oil leaks. No other competitors provide this quality of fitting and, as a result, competitors have many more oil leak issues than John Deere compact loaders.

Integrated hydraulics 

The loader control (joystick) is integrated into the loader mast for easy ergonomic operation by the operator from the tractor seat. This also allows simultaneous boom and bucket functions to provide superior performance while moving material from a pile. 

End-of-pin lubrication means easy maintenance

All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced.  No more searching for grease points that are hard to find.  Removing the grease gun from the grease fitting is not a problem as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting.

Loader boom

The upper boom section is contoured to match the tractor hood profile for improved operator visibility forward. The lower boom section is tapered and kept close to the front of the tractor for improved maneuverability. Maximum durability is provided when the two boom halves are welded together because the upper boom section overlaps the lower boom section providing additional strength in the knee area.

  • Torque tube connection on boom arms provides strength and rigidity
  • Hydraulic lines and hoses are mounted on the inside of the boom for protection from possible damage
  • Bucket linkage improves rollback power and improves working angles on the D170 Loader

Loader cylinders

Boom and bucket cylinders are designed to match tractor hydraulics, resulting in productive cycle times.
Cylinder rod features a nitride (black) rod that results in improved corrosion resistance versus a standard chromed cylinder rod.

Loader mast

A casting is used to manufacture the mast versus a welded-steel structure because this enables the unique shape to provide improved visibility forward along the tractor.

Hood guard for 4M Tractors

As a factory-installed option, the D170 Loader comes with a hood guard already mounted to the compatible 4M Tractor as part of the loader bracing system. 

Hood guard for 4R Tractor (OOS only)

A hood guard can be ordered for a tractor without ordering a loader.
The hood guard protects the front of the tractor while operating the loader.
The bolt-on design stays with tractor when loader is removed.

73-in. (1850-mm) materials bucket

Materials buckets are available to match tractor and loader applications. May be used for loading dirt, gravel, feed and light materials, as well as scrapping, digging and other general purpose tasks.

Specifications

Fits the following models: 4M and 4R Series

Leveling configuration ---
Bucket used Materials
Bucket weight, lb (kg) 238 lb108 kg
Lift capacity at full height, lb (kg) ---
Measured at pivot (U) 2391 lb1087 kg
Measured at 500 mm ahead of pivot (V) 1760 lb800 kg
Measured at 800 mm ahead of pivot (V) ---
Lift capacity at 59 in. (1500 mm), lb (kg) ---
Measured at pivot (W) 2875 lb1307 kg
Measured at 500 mm ahead of pivot (X) 2295 lb1043 kg
Measured at 800 mm ahead of pivot (X) ---
Boom breakout force, lbf (kgf) ---
Measured at pivot (Y) 3853 lbf1743.7 kgf
Measured at 500 mm ahead of pivot (Z) 2902 lbf1315.4 kgf
Measured at 800 mm ahead of pivot (Z) ---
Bucket rollback force capacity, lbf (kgf) ---
At maximum height (VV) 4112 lbf1866.1 kgf
At 59-in. (1500-mm) lift height (XX) 5191 lbf2355.1 kgf
At ground-level line (ZZ) 3487 lbf1580.6 kgf
Dimensions ---
Maximum lift height, in. (mm) (A) 112.1 in.2850 mm
Clearance ---
At full height - bucket level, in. (mm) (B) 104.1 in.2646 mm
At full height - bucket dumped, in. (mm) (C) 90.4 in.2298 mm
Overall length (I+F), ft (m) 11.5 ft3.522 m
Overall height in carry position, ft (m) (J) 4.94 ft1.5 m
Digging depth, in. (mm) (H) -5.7 in.-146 mm
Reach ---
At maximum height, in. (mm) (D) 27.7 in.705 mm
At ground level - bucket level, in. (mm) (F) 65.8 in.1672 mm
Bucket angle ---
Dump angle, degrees (E) 42 degree (angle)
Rollback angle, degrees (G) 28.6 degree (angle)
Dump angle, ground 128.2 degree (angle)
Cycle times ---
Loader raise, seconds 4.26 seconds
Loader lower, seconds 3.13 seconds
Bucket dump, seconds 3.14 seconds
Bucket rollback, seconds 2.42 seconds
Date collected ---
BigVideoIcon

Equipment Videos

See the latest john deere videos

BigCareersIcon

Careers

Find the job your looking for