Dalhart, Spearman, Dumas, Perryton, Pampa, Guymon, Boise City
email facebook youtube twitter instagram

John Deere 4105

Double tap to zoom



  • Yanmar Diesel Engine
  • Hydrostatic Transmission
  • Standard 4-wheel drive
  • Independent PTO


Manufacturer John Deere
Model 4105 (2017)
Family  CYDXL1.50K3T or DYDXL1.50L3T or EYDXL1.50L3T or FYDXL1.50L3T  
Manufacturer  Yanmar  
Engine model  ---  
Engine power (gross)  30.2 kW 
   41 hp 
   97/68/EC rated power  
Power take-off (PTO) power  24.2 kW 
   32.5 hp 
Rated engine speed  2800 rpm 
Type  Diesel  
Injection pump type  In-line with electric shutoff  
Aspiration  Turbocharged  
Emissions compliance  Tier 4 Interim or Final Tier 4  
Cylinders/displacement  3 / 1.496 L 
   3 / 91.3 cu in. 
Number of cylinders  Three  
Cylinder liners  Cast-in-block  
Bore and stroke  84 x 90 mm 
   3.3 x 3.54 in. 
Compression ratio  19.0:1  
Lubrication  Pressurized  
Cooling system  Water pump  
Air cleaner  Dual element with electronic restriction indicator  
Engine torque at rated speed  80.3 Nm 
   59.2 lb-ft 
Fuel tank capacity  39.7 L 
   10.5 U.S. gal. 
Battery size  500 CCA 
Alternator (12-V)  40 amp 
Starter size  1.4 kW 
   1.9 hp 
Fuel system  
Type  Direct injection  
Fuel consumption  8.9 L/hr 
   2.35 U.S. gal./hr 
*Fuel consumption rate should be used for comparison purposes only  ---  
Standard transmission; forward/reverse  Hydro, 2-Range  
Optional transmission; forward/reverse  ---  
Left-hand reverser  No  
Transmission gear ranges  ---  
Final drive  Planetary  
Brakes  Wet disk  
Steering  Power steering  
Clutch, wet/dry  ---  
Clutch disk diameter wet clutch  ---  
Axle capacity  ---  
Front  720-1450 kg 
   1587-3197 lb 
Rear  1815 kg 
   4000 lb 
Creeper  No  
Cruise control  Optional  
Differential lock  Yes  
Drawbar maximum vertical load    
Type  Open Center  
Pump rated output  56.2 L/min 
   14.8 gpm 
Steering  21.6 L/min 
   5.7 gpm 
Implement  34.7 L/min 
   9.2 gpm 
Pump type  Dual gear  
Maximum operating pressure  2500 psi 
Draft control sensing  Position control  
Remote control valves available  2  
3-point hitch  
Category  Category 1  
Lift capacity, 24-in. behind link arms  999 kg 
   2200 lb 
Power take-off (PTO)  
Standard  Rear @ 540 rpm 
Optional  ---  
Control  Independent  
Clutch  Wet disk  
Brake (for mid and rear PTO)  N/A  
Engagement method  ---  
Fluid capacities  
Crankcase with filter  4.3 L 
   4.5 qt 
Transmission and hydraulic system  25.7 L 
   6.8 U.S. gal. 
Final drive  
Type  Planetary  
Differential lock  Yes  
Operator station  
Rollover protective structure  ASAE S478  
Type  Rigid  
Platform - flat/straddle  Semi-flat  
Gear shift location - console/floor  Left Side  
Compliance  ---  
Visibility  ---  
Air conditioning, temperature differential  ---  
Doors  ---  
Noise rating  ---  
Seat equipment  ---  
Wheelbase  1727 mm 
   68 in. 
Front axle clearance  373 mm 
   14.7 in. 
Turning radius with brakes  ---  
Turning radius without brakes  2.89 m 
   9.5 ft 
Limited slip differential  ---  
Approximate shipping weight (open-station; cab)  1355 kg 
   2987 lb 
Front  10-16.5 R4 / 8-16 R1 - MFWD  
Rear  17.5L-24 R4 / 14.9-24 R1 - MFWD  
Front tread range  ---  
Rear tread spacing  ---  
Toolbox  ---  
Tilt steering wheel  ---  
12-V Outlet  ---  
Date collected  ---  

Equipment Videos

See the latest john deere videos



Find the job your looking for